Pages

Rabu, 29 September 2010

DGM 2004 3 Tower


Goss SC/SSC Rebuilt Quarter Folders



SC or SSC Rebuilt Quarter Folders
·         Sold on an “Exchange” Basis

·         Rebuilt to Original Specifications

·         One Year Warranty

·         Typically Available in 30 Days

·         Delivery and Installation Available

GOSS Urbanite CPIR


The “CPIR” Unit

Cleaned, Painted & Inspected with New Rubber Rollers



Urbanite Units from our Inventory

Thoroughly Inspected and Cleaned

Badly worn or broken parts replaced

All good Plate and Blanket Cylinders

All good Copper & Stainless Rollers

All good Chrome Rollers

Ready to install and run in production

New Rubber Rollers installed

Painted an original Goss color per the Customers request

All Connecting Parts included for installation.

Guarantied to Print Industry Standards when Installed by WGS

GOSS SC/SSC two high Reconditioned


Reconditioned Defined


The following list is standard for reconditioned Goss SC/SSC units:
1.      Dismantle entire unit down to side frames.
2.      The unit and all necessary connecting parts, top iron, etc. are thoroughly cleaned
3.      All frames and parts are re-painted to original specifications.
4.      Side frames and bores are inspected and re-bored for oversize cylinder sleeves as required.
5.      All bearings are replaced
6.      Bushings are replaced as required.
7.      Cylinders are replaced with remanufactured Stainless Steel cylinders as required.
8.      Ink fountain rollers are replaced with remanufactured 316L Stainless Steel Rollers.
9.      Micro-Metric rollers are replaced with new rollers.
10.  All ink fountain blades and seals are replaced with new components.
11.  All water oscillator  and water pan rollers are replaced as required.
12.  All Rylsan or Copper ink oscillators are replaced as required
13.  Ring and pinion gears replaced with new as required
14.  Internal drive line replaced with new as required.
15.  Replace all nuts, bolts, fasteners etc., with new.
16.  Replace all rubber rollers with new.
17.  All gearing is thoroughly inspected and replaced as required.
18.  Inspect and repair or replace as required all other parts including electrical motors.
19.  Reassemble unit using all factory specifications, settings and adjustments.
20.  Test run unit at top rated speed, perform all electrical, mechanical and pneumatic checks. 
21.  Prepare unit and all connecting parts with rust proof protective wrapping for shipment.
22.  Load and secure on board truck or container as required

ESTEVAN 4 Tower Goss sc



Enkel & Martin Splicer Reconditioned



Reconditioned Defined

The following list is standard for reconditioning Splicers:
1.       Dismantle as required for thorough inspection.
2.       The splicers and all necessary connecting parts, top iron, etc. are thoroughly cleaned
3.       All frames and parts are re-painted to original specifications per customer request.
4.       Bearings are replaced as required
5.       Chains are replaced as required.
6.       Replace all nuts, bolts, fasteners etc., with new.
7.       Replace all vacuum rollers with new as required.
8.       All pneumatics are thoroughly inspected and replaced as required.
9.       Inspect and repair or replace as required all other parts including electrical motors.
10.    Reassemble unit using all factory specifications, settings and adjustments.
11.    Test Splicer and perform all pre-installation electrical, mechanical and pneumatic checks. 
12.    Prepare unit and all connecting parts with rust proof protective wrapping for shipment.
13.    Load and secure on board truck or container as required

Upper Former GOSS Reconditioned


Warranty:
180 Days parts warranty:  Web Goss Spesialist Inc warrants this equipment to be free from defects in material and workmanship.  WGS agrees to repair or replace, at it’s option, without charge for parts for any item proven to be defective in material or workmanship under normal use, within six months after delivery, provided that purchaser shall WGS prompt notice of such defect.  WGS shall not be liable for any parts replaced, repairs, modifications, or changes made by others, or for any defects resulting from shipment, or improper installation (if done by others), or improper operation, or inadequate maintenance; and in no event shall WGS be liable for losses arising from or in connection with this transaction. This warranty does not include labor, freight, or replacement of consumable items.